53
6.13 Anti-tipper
The C1000 DS power wheelchair is equipped with an anti-tipper as standard equipment. It is
only installed in pairs (drive side, one on the left and right of the drive unit sustainer, respectively).
6.13.1 Removing the anti-tipper holder
Tools:
❒
Allen wrench, size 6
❒
Open-end or combination wrench, size 13
Steps:
1. Loosen the Allen head screw on the holder.
2. Remove the anti-tipper holder and replace if required.
Properly reassemble all components upon completion of the work.
fig. 51 Removing the anti-tipper holder
6.13.2 Removing the anti-tipper wheel
Tools:
❒
Allen wrench, size 5
❒
Open-end or combination wrench, size 13
Steps:
1. Loosen the Allen head screw on the wheel.
2. Remove the wheel and replace if required.
Properly reassemble all components upon completion of the work.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
