91
Tools:
❒
Allen wrench, size 3
❒
Open-end or combination wrench, size 10
Steps:
1. Remove the headrest.
2. Guide the metal rods of the headrest through the two loops on the control panel holder.
3. Reattach the headrest to the seat.
4. Adjust the width of the holder with the two set screws.
fig. 103 Attendant control on the Recaro® seat
6.20.7 Installing joystick accessories
Tools:
❒
Allen wrench, size 6
Steps:
1. Slide off the top of the joystick.
2. Slide an accessory such as the fork for tetraplegics, golf ball, stick etc. onto the metal pin.
3. Mount the accessory by tightening the set screw.
fig. 104 Installing joystick accessories
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
