96
6.21.4 Connecting external switches
The underside of the push button module has three inputs for the connection of external switch-
es, e.g. buddy buttons.
Preparation:
❒
Turn the control unit off.
❒
Remove the fuse (see Section 6.2).
Steps:
1. Remove the protective pin from the input on the push button module.
2. Insert the buddy button cable into the input on the push button module.
3. Insert the fuse.
4. Switch on the control unit.
5. Test the functionality of the buddy button.
fig. 110 Connecting an external switch (e.g. buddy button) to the push button module
INfORMATION
The assignment of connections for external switches is identified by corresponding symbols on the
back of the push button module.
6.22 Accessories
INfORMATION
Only use original options supplied by the manufacturer. The optional components may only be mounted
as described here. Failure to comply will void the warranty.
6.22.1 Retrofitting the headrest adapter and installation kit
The standard and contour seats may be retrofitted with an optional headrest. An adapter which
is mounted on the back frame is required to attach the installation kit that holds the headrest.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
