77
fig. 86 Retrofitting the seat tilt option
6.16.3 Retrofitting the seat height adjustment (option)
The C1000 DS power wheelchair can be retrofitted with a seat height adjustment option in two
versions (up to 130 kg or up to 200 kg). Different springs need to be installed for this purpose
(see Table 3).
The seat base with seat height adjustment is delivered as a pre-assembled unit.
Preparation:
❒
Turn the control unit off.
❒
Remove the fuse (see Section 6.2).
❒
Remove the footrest (see Section 6.15.18).
❒
Remove the seat frame (see Section 6.15.5).
Tools:
❒
Allen wrench, size 5
❒
Open-end or combination wrench, size 13
Steps:
1. Mount the pre-assembled unit consisting of the seat frame, seat brackets and actuator on
the wheelchair frame.
2. Connect the actuator to the controller or seat module (AAM).
3. Install the seat back on the bearing plate (see Section 6.15.3).
4. Programme the control unit and test the seat height adjustment function.
Properly reassemble all components upon completion of the work.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
