OTC Welbee M350 II, Owner'S Manual

Page: 21 / 148

19
Chapter 2
Product Specification
and Configuration
P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
$FFHVVRU\QRWVXSSOLHG
This section explains the accessories to be prepared by the customer before operating the welding power source.
Prepare the following:
• Gas regulator
For the gas regulator, make sure to use a device for compressed gas cylinder that conforms to the specific application
of the shield gas.
• Shield gas
Use a shield gas suitable to the welding method.
• Cooling water circulation device
In using the water-cooled welding torch, prepare a cooling water circulation device.
• Welding torch (for TIG welding)
For TIG welding, prepare a torch for TIG welding as well as a gas hose.
• Welding electrode holder (for DC STICK welding)
For DC STICK welding, prepare a welding electrode holder and a welding electrode.
WB-M352: Use a cable connector for connection (Specification: DIX SK 50/Part No.: 4734-016) to the welding power
source.
WB-M502: Use a crimp-style terminal for connection (Specification: R80-10/Part No.: 100-1298) to the welding power
source.
2SWLRQDODFFHVVRULHV
This section explains the optional accessories used with the welding power source.
5HPRWHFRQWUROYROWDJHGHWHFWLRQFDEOHDQGRWKHURSWLRQDOLWHPV
Following items are optionally available including remote control and voltage detection cable.
Name Remarks
CO
2 -
gas Carbon dioxide (CO
2
) 100 %
MAG gas
Argon (Ar) 80 % + Carbon dioxide (CO
2
) 20 %
MIG gas (stainless)
Argon (Ar) 98 % + Oxygen (O
2
) 2 %
MIG gas (aluminum/aluminum-bronze/silicon-bronze) Argon (Ar) 100 %
Product name Part No. (Model) Remarks
Analog remote control K5804S00 Includes 10 ft (3 m) cable
Analog foot control KM3022
Conversion cable
K8116E00
Used when the conventional analog remote control (K5416Z00) is used
Digital remote control E-2454 CAN communication cable and BKCAN conversion connector are separately required.
CAN communication cable
BKCAN-0405 16 ft (5 m)
BKCAN-0410 33 ft (10 m)
BKCAN conversion connector K5810B00
Welding interface unit IFR-101WB For robots by other manufacturer
CAN communication module K5422C00 For using both the digital remote control and servo feeder for CAN.
PC welding monitor K-7496
Voltage detection cable K5416N00 Base metal side, 33 ft (10 m)
Voltage detection cable K5416G00 Base metal side, 99 ft (30 m)
Fieldbus connection tool IFR-800 (*1)
TIG valve kit K8197A00
For WB-M502, in order to use the TIG valve kit, the power cable for torch side (BKPJT-
60R2) is necessary.
*1: IFR-800EI (EtherNet/IP connection type)
IFR-800PB (PROFIBUS connection type)
IFR-800DN (DeviceNet connection type)
IFR-800PN (PROFINET connection type)