OTC Welbee M350 II, Owner'S Manual

Page: 68 / 148

M
EMORY
F
UNCTION OF
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
66
2.
Turn the screen operation knob (or parameter adjustment knob), and select a JOB No.
3.
Press the screen operation knob.
4.
Press the screen operation knob.
⇒ The welding condition is registered with the selected JOB No., and the storage function mode is terminated.
The registered welding condition can be read out for use.
5HDGRXWRIZHOGLQJFRQGLWLRQV
This section explains how to read out the welding conditions registered in the memory.
T I P S
• The current welding condition set on the operation panel is overwritten by the welding conditions read
out. To save the current welding condition, ensure to register it to the memory.
1.
Display “LOAD JOB” in the MENU screen.
⇒
When there is no registration data on the selected JOB No,
“no data” is displayed on the LCD panel, and “- - - -” is
displayed on the left digital meter.
⇒ When there is a registration data on the selected JOB No.,
the set welding current value is displayed on the left
digital meter.
⇒ "- - - -" is displayed on the left and right digital meters in a
flashing mode.
• To cancel the memory registration, press the CANCEL key. The “SAVE
JOB” mode is terminated.
●
Turn the screen operation knob and point the cursor to
LOAD JOB.
● Press the screen operation knob.
⇒ The JOB No. (registration No.) is displayed on the right
digital meter in a flashing mode, and the LED of JOB lights
up.
⇒ On the left digital meter, the setting value of the welding
current registered to the JOB No. if any is displayed (if
there is no registration, "- - - -" is displayed), and the "A"
LED lights up.
⇒ If the welding condition corresponding to the selected JOB
No. is not registered, “no data” is displayed on the LCD
panel, and “- - - -” will flash on the left digital meter.
)81&7,216
/2$'-2%
6$9(-2%
:(/'021,725
.(</2&.㸸
%$&.83
0(18
2)) 21
+20( 6(/(&7 (17(5