26
Set the
Screen Stretch Window
to
Medium
(or otherwise manually adjust
for best image appearance), and use
Save
under the
File
menu to save your
image. You can now perform any wanted imaging processing.
Combine Methods
We previously mentioned in “Imaging Deep Sky Objects” that
Average
is one
of the methods to combine your images. There are three other methods that
will achieve slightly different results:
Sum
,
Median
, and
Sigma-Clip
. Each of
these methods will improve your image by stacking it, but each one combines
the images in different ways.
1.
Average
sums all the pixels and divides by the number of images chosen
to combine.
2.
Sum
adds up all the pixels in the images. This will increase the
Max Pixel
value and the offset in the
Screen Stretch
window. If you
Sum
the image,
the file should be saved as a fit in
IEEE Float
(beyond 16 bits) to preserve
all the data in the image.
3.
Median
takes the middle pixel value from all of the images. The
Median
mode is useful when some pixels are extremely bright or dark (hot/dark
pixels, cosmic ray hits). If Median mode is used, a
Normalize
option is
available.
Normalize
will remove differences in the image scaling which
could interfere with the median processing.
4.
Sigma-Clip
combines the best features of
Average
and
Median
.
Sigma-
Clip
is the best choice for removing unwanted noise, hot pixels and satel-
lite trails. It works like
Average
but also calculates the standard deviation
of the averaged pixel values. The
Sigma Factor
will determine how many
pixels from the standard deviation are discarded. The lower the
Sigma
Factor
, the more pixels are discarded. 0.5 is a good value to start with.
A new average is calculated without the discarded pixel. This value is
assigned to the corresponding pixel in the output image.
Filter
Filtering an image is an operation that emphasizes certain characteristics of an
image while suppressing others. MaxIm DL Essentials supports two kinds of
filters:
Unsharp Mask
and
Gaussian Blur.
In the
Filter
window select which
one of these filter types you would like to apply.
Unsharp Mask
is a method of sharpening or high-pass filtering an image. It
amounts to subtracting a low-pass filtered version of an image from itself. The
low-pass filtered version is called the mask. The
Low-Pass Filter
itself can
be set to
Mild
or
Strong
for different effect. Use
Mask Weight
to control the
strength of the mask applied to the image. The
Mask Weight
is in percent; the
higher the number, the stronger the mask.
Gaussian Blur
is a method of blurring an image. It can be used to suppress
noise in an image at the expense of sharpness. The
Radius
setting controls
