16
Standard Type
DRL20
24 VDC
Max. Thrust Force: 15 N, Stroke: 25 mm
■
Specifications
●
Actuator
Repetitive Positioning
Accuracy [mm]
±
0.003
Lost Motion [mm]
Ground Ball Screw: 0.02
Product Name
Stroke
Ball Screw Type
Lead
Resolution
✽
1
(Resolution of 1)
Max. Transportable
Mass [kg]
Max. Thrust
Force
✽
3
Max. Holding
Force
✽
4
Max.
Speed
✽
5
Max.
Acceleration
[mm]
[mm]
[mm]
Horizontal
Vertical
✽
2
[N]
[N]
[mm/s]
[m/s
2
]
DRL20-02B1P
■
-K
■
25
Ground 1
0.002
−
1.5
15
15
20
0.2
●
A symbol indicating the additional function
N
(adjustment knob type) is entered in the box
■
in the product name. If there is no additional function, no code is entered in the box
■
.
●
B
(pulse input) or
D
(built-in controller) indicating the driver type is entered in the box
■
in the product name.
✽
1 Sixteen resolutions can be set.
✽
2 When the power is turned off, or when in an all windings off situation, the actuator loses its thrust force or holding force. As such, it can no longer keep the load in position or withstand an external
force.
✽
3 The max. thrust force is measured during constant-speed operation in the horizontal direction with no load applied to the moving parts (screw shaft and joint).
Thrust force varies with load mass and acceleration.
✽
4 The maximum holding force at excitation is the value when the automatic current cutback function is ON (Standstill Current: 50% of the rated current). The holding force is 0 when the power is OFF.
✽
5 Use the actuator at a maximum speed of 13 mm/s for the operating temperature range of 0 to 10˚C.
Note
●
Use the actuator in conditions where its surface temperature will be 90˚C max.. The repetitive positioning accuracy is measured at a constant temperature under a constant load.
■
Product Line
●
Ground Ball Screw
◇
Built-In Controller
Product Name
Stroke [mm]
Lead
[mm]
Motor Type
Additional Function
DRL20-02B1P-KD
25
1
Standard
−
DRL20-02B1PN-KD
25
1
Standard
Adjusting Knob
The following items are included in each product.
Actuator, Driver, Power Connector (CN1), Connection Cable (for I/O Signals, CN2),
Connection Cable (for Actuator Connector, CN4), Connection Cable (for Actuator
Connector), Operating Manual
◇
Pulse Input
Product Name
Stroke [mm]
Lead
[mm]
Motor Type
Additional Function
DRL20-02B1P-KB
25
1
Standard
−
DRL20-02B1PN-KB
25
1
Standard
Adjusting Knob
The following items are included in each product.
Actuator, Driver, Power Connector (CN1), Connector for Actuator (CN2), Connector for I/O
Signals (CN3), Connection Cable (for Actuator Connector), Operating Manual
