© Orbotech 2005
Symbion™ Programmer Guide
65
Draft - Confidential
Setup for Solder Inspection
Overview
The
Property Editor
provides a tab for
Solder
inspections. In most cases
setup of the inspections is as simple as activating those required.
Tools are provided for more detailed setup of all
Solder
inspections.
Not all inspections described will be possible for all
Inspection
Types
Possible
Solder
inspections are;
•
Solder Volume
, reports an error when the solder joint is detected as
having insufficient or excess solder volume.
Inspection is on or off, the performance of the inspection may be tuned
using the
TBA Setup Tool
.
•
Solder Open
, reports an error when the solder joint is detected as
having open solder joints.
Inspection is on or off, the performance of the inspection may be tuned
using the
TBA Setup Tool
.
•
Short Circuit
, reports an error when the terminal is detected as being
shorted with its neighbor.
Inspection is on or off, the performance of the inspection may be tuned
using the
TBA Setup Tool
.
Summary of Contents for Symbion S36
