© Orbotech 2005
Symbion™ Programmer Guide
41
Draft - Confidential
Pre-Inspection Tasks
Recipe Verification
Errors found by the Verify stage of the Wizard must be rectified. The current
verified state of the Recipe is always shown in the toolbar by the icon
indicating the recipe is OK (with a green tick) or has errors (with a red cross).
The Recipe can be verified at any time by clicking the button
.
The Verification process checks for the following;
•
That all components have been linked. ‘
Unassigned component
’ shows
for each component not linked.
•
That the structure of used packages is valid. Messages such as ‘
Format
Terminals
’ will be given according to the particular error
•
That all specified Inspections are possible. The Message ‘
No Inspector
for…
’ will be displayed
•
That any configuration options that may affect performance are set
correctly.
A full list of possible messages can be found in the
User Reference
.
Clicking any message generated by the Recipe Verification will select the
component, or recipe element, in which the problem was found.
Summary of Contents for Symbion S36
