Orbotech Symbion S36, Programmer'S Manual

Page: 88 / 128

© Orbotech 2005 Symbion™ Programmer Guide 81
Draft - Confidential
Macro Inspector
Overview
The
Macro Inspector is a powerful tool for creating inspections in addition to
the provided inspectors.
Any Macro is based on analysis of user defined areas, and comparison of
these areas with one another or some threshold.
Up to three Macro Inspectors can be added to each component, once added
to a package the Macros will be stored if the Package Library is updated.
Adding a Macro
To add a macro inspector to a component;
•
Select the component on which the macro should be set up
•
In the Property Editor click the Inspectors tab
•
Right Click the Inspectors tab and select Add Inspector
•
Double Click the Undefined Inspector and select one of the macro
inspectors
The inspectors macro.1 , macro.2 and macro.3 are identical.
The names facilitate the use of three macros on one component.