Orbotech Symbion S36, Programmer'S Manual

Page: 115 / 128

108 Symbion™ Programmer Guide © Orbotech 2005
Draft - Confidential
Block Skip
When testing Multiboards it can be necessary to abort testing of a particular
miniboard within the Multiboard.
This is achieved by adding a Block Skip mark to the recipe, when such a test
fails the testing of the parent (miniboard, board or frame) is aborted.
To add a Block Skip mark to a recipe;
•
Select the appropriate Frame, Board or Miniboard in the table editor or
graphically.
When setting a Block Skip on a Miniboard or Board use the
Content Manager to ensure the work is duplicated on the other
Miniboards or Boards, see
Multiboard Editing for more details
•
Right click, and in the context menu select Insert > Component
A component with an UNDEFINED Inspection Type is added.
•
Move and resize the component as necessary
•
In the Property Editor right click the Inspections tab, and select Change
Inspection Type > Tool
Setting a Block Skip is also possible with inspection type Macro
•
In the
Inspections
tab of the
Property Editor
turn off the
Location
inspection
•
In the Inspectors tab of the Property Editor double click on the already
added Inspector and change to macro.1
•
In the Inspectors tab of the Property Editor double click on the already
present Inspector and change to macro.1