Orbotech Symbion S36, Programmer'S Manual

Page: 127 / 128

120 Symbion™ Programmer Guide © Orbotech 2005
Draft - Confidential
Camera Alignment Check
The Camera Alignment check verifies the correct alignment of the four angled
cameras with the top camera.
This check is automatic and uses the cross target on the test card.
•
Click
When the check is completed the date is refreshed and colored for the result.
A failing check will show a cross in the button.
If the check fails it may be necessary to re-align one or more
cameras, refer to
Service Manual
Brightness Adjustment Check
The Brightness Adjustment check verifies the correct brightness of the
cameras, relative to the top camera.
This check is automatic and uses the grey target on the test card.
•
Click
When the check is completed the date is refreshed and colored for the result.
A failing check will show a cross in the button.
If the check fails it may be necessary to adjust one or more
cameras, refer to
Service Manual
Flash Alignment Check
The Flash Alignment check verifies the proper alignment of the flashes.
This check is automatic and uses the grey area on the test card.
•
Click
•
Click
Yes
to confirm warming up the flashes before the check
It is recommended always to warm up the flashes before any
check, this process takes two and a half minutes.
When the check is completed the date is refreshed and colored for the result.
A failing check will show a cross in the button.
If the check fails the system will initiate the Flash Level
Adjustment, in case of further failure refer to
Service Manual