Operation
Version 1.0.1 dated 2017-11-16
Page 41
Translation of the original instructions
TX6222
GB
T
X
6222
_GB
_4.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
Workpieces that require a high concentricity precision are machined between the centres. For
holding purposes, a centre hole is drilled into both plain machined faces of the workpiece.
Img. 4-3: Turning between centres
The lathe dog is clamped onto the workpiece. The driving bolt, which is screwed into the flange
for the lathe chuck, transmits the torque to the lathe dog.
The fixed centre glides into the centre hole of the workpiece on the spindle nose side. The fol-
low centre glides into the centre hole of the workpiece at the tailstock side.
Feed
Workpiece
Live centre
60
0
Workpiece
Lathe dog
Chuck flange
Driving bolt
Fixed
Centre 60
0
