Operation
Version 1.0.1 dated 2017-11-16
Page 35
Translation of the original instructions
TX6222
GB
T
X
6222
_GB
_4.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
4.8
Speed setting
ATTENTION!
Only change speeds (gear settings) when the machine is at a stop.
4.8.1
Rotational direction
The rotational direction lever (1) activates the lathe. The lathe can only be switched on, when
the lathe chuck protection is closed.
Move the shift lever down if you want the turning direction to be anti-clockwise.
The middle position is the neutral position "0".
Move the shift lever up if you want the turning direction to be clockwise.
ATTENTION!
Wait until the lathe has come to a complete halt before changing the rotational direction
with the shift lever. Use the foot brake to slow down the lathe more effectively.
INFORMATION
The shift lever (1) can only be moved in the desired direction if the button (2) on the shift lever
is pressed.
4.8.2
Speed
Set the desired speed (1).
4.9
Feed
The selector levers are used to set the feed or the pitch required for the thread-cutting.
4.9.1
Longitudinal feed selection
Select the suitable feed for the work to be carried out.
1
2
1
