Delivery, interdepartmental transport, unpacking
Version 1.0.1 dated 2017-11-16
Page 30
Translation of the original instructions
TX6222
GB
T
X
6222
_GB
_3.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
3.6.4
Aligning the machine
Once the bases are in place proceed to level according to the following description:
Fit precision spirit levels on the cross slide.
Position the carriage on the centre of the bed and, using the four end adjusting screws ( 1 ),
adjust until the machine spirit level displays an approximate value.
Move the carriage to the headstock and then to the tailstock and align the machine simulta-
neously with the adjusting screws ( 1 ) until the machine spirit level shows a value of
0.05mm/m.
Adjust the adjusting screws ( 2 ) until they place pressure but do not vary the levelling.
Lock with nuts ( 3 ) and check the levelling again.
C-C
C
1
A-A
A
3
B-B
B
3
1
1
1
2
anchor-free assembly
with vibration dampers
anchored assembly
