One World Touch OP 1200, Service Manual, Page: 36 / 135

Service Manual version 1008
OP 1200/1500/1700 (PC920 Intel 945G)
4-28
4.1.1. Disassembling the Display Module
The display module (A) is mainly composed of two modules, one LCD (B) and the other front bezel (C)
modules.
To disassemble the display module, follow the steps below.
1. Detach the LCD module (A) from the front
the bezel module (B) by unscrewing the six
screws used to fix the two modules
together.
2. Remove the LCD panel (1)
from the LCD holder (2)
by unscrewing the four
screws used to retain
them together.
3. For OP 1200, detach
the LCD power wires
from the inverter and
remove the inverter (4)
from the LCD holder
by loosening the two
retaining screws. For
OP 1500 and 170,
detach the two LCD
brackets (3) from the
LCD panel by
unscrewing the two
screws at each side.
4. Remove the
touchscreen (5) from
the front bezel (6) by
unscrewing the ten
screws used to retain
the four touch
brackets (7) to the
front bezel.
(3)
(3)
(1)
(B)
(2)
(A)
(2)
(4)
OP 1200 OP 1500/170
(5)
(7)
(6)