One World Touch OP 1200 Service Manual Download Page 114

Page: 114 / 135

Service Manual version 1008

OP 1200/1500/1700 (PC920 Intel 945G)

8-106

8.1. System Chipset Drivers

The system chipset used on PC920 is

Intel 945GV

. The chipset drivers for different operating

systems are stored under the following route:

Drivers/Motherboard/PC920/Chipset

For updated system drivers, please have them downloaded from the following website

http://www.intel.com

8.2. Ethernet Drivers

The PC920 provides a 10/100 Base T fast Ethernet.
The Ethernet chipset used on PC920 is

Realtek RTL8100B

. The PC920 Ethernet drive diskette or CD

diskette contains the following drivers.
Realtek RTL8100 Ethernet drivers for



Windows 95/95OSR2



Windows 98



Windows 2000



Windows NT



Windows ME



Windows XP

The related drivers are stored under the following route:

Drivers/Motherboard/PC920/LAN

For the Ethernet drivers, please download the updated drivers from the following website

http://www.realtek.com.tw

Summary of Contents for OP 1200








































































































































Search results

Summary of Contents for OP 1200

Reviews:

Related manuals for OP 1200

Brands by name

Popular brands

One World Touch OP 1200, Service Manual

Search results

Summary of Contents for OP 1200

Reviews:

Related manuals for OP 1200

Brands by name

Popular brands