One World Touch OP 1200, Service Manual

Page: 103 / 135

Service Manual version 1008
OP 1200/1500/1700 (PC920 Intel 945G)
7-95
7.4.6. Power Management Setup
Selecting Power Management Setup on the main menu displays the following menu.

ACPI Function
This item allows the user to select the ACPI (Advanced Configuration and Power Interface) function.
The options are S1, S3 & Disable

Power Management
Power Management mode setting is to select the wake-up device.
Video Off Method
This item defines how the video is powered down to save power. The default setting is DPMS Mode.

Video Off in Suspend
This option defines if the video is powered down when the system is put into suspend mode. The
default setting is Suspend -> Off.

Suspend Type
If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power saving mode.

MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the system from a power-saving
mode, use this item to specify the interrupt request line (IRQ) that is used by the modem. You might
have to connect the fax/modem to the main board Wake On Modem connector for this feature to work.
The default setting is 3.

Suspend Mode
The CPU clock will be stopped and the video signal will be suspended if no Power Management events
occur for a specified length of time. Full power function will return when a Power Management event
is detected. Options are from 1 Min to 1 Hour and Disabled. The default setting is Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Device
ACPI Function [Enabled] Item Help
ACPI Suspend Type [S1(POS)] Menu Level

X Run VGABIOS If S3 resume NO
Power Management [User Define]
Video off Method [DPMS]
Video off In Suspend [Yes]
Suspend Type [Stop Grant]
MODEM Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft –off by PWR-BTTN [Instant-off]
POWER After PWR-Fail [off]
Wake-up by PCI card [Enabled]
Power on by Ring [Enabled]
Wake up on LAN [Enabled]
X USB KB Wake-up From S3 Disabled
Resume by alarm [Disabled]
X Date (of Month ) Alarm 0
X Time (hh
：
mm
：
ss) Alarm 0
：
0
：
0
** Reload Global Time Events**
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD,COM,LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
↑ ↓ → Move Enter ： Select +/-/PU/PD ： Value F10 ： Save ESC ： Exit F1 ： General Help
： ： ：