Serial Communication
153
ZG User’s Manual
4
CONN
ECTION
WITH EXTERNAL DEVICE
Command Processing Time
The command processing time differs according to the command.
The following shows typical command processing times for the TRIG, MEASURE and
PROFILE commands.
The command processing time above shows measurement values for the ECO monitor.
Command
Setting
Processing time
RS-232C
(115200 bps)
USB
TRIG
Sensitivity: MULTI, CCD mode: NORMAL
280 ms
280 ms
Sensitivity: MULTI, CCD mode: HI-RESO
550 ms
550 ms
Sensitivity: MULTI, CCD mode: HI-SPEED 170 ms
170 ms
Sensitivity: FIXED, CCD mode: NORMAL
20 ms
20 ms
Sensitivity: FIXED, CCD mode: HI-RESO
30 ms
30 ms
Sensitivity: FIXED, CCD mode: HI-SPEED 10 ms
10 ms
MEASURE
-
10 ms
10 ms
PROFILE 0
(profile output format: ASCII)
-
1500 ms
1000 ms
PROFILE 1
(profile output format: binary)
-
250 ms
30 ms
Summary of Contents for ZG -
