Measurement Settings
62
ZG User’s Manual
< 3-pt step >
To measure a protrusion (+ direction) taking the base as the reference plane:
To measure an indentation (- direction) taking the top surface as the reference plane:
How to adjust the region p.66
Icon
Description
Average
Measures the step between the
average value of P3 taking the
average values of both sides (P1,
P2) as the reference plane.
Peak
Measures the step between the
maximum value of P3 taking the
average values of both sides (P1,
P2) as the reference plane.
Icon
Description
Average
Measures the step between the
average value of P3 taking the
average values of both sides (P1,
P2) as the reference plane.
Bottom
Measures the step between the
minimum value of P3 taking the
average values of both sides (P1,
P2) as the reference plane.
Step
P3 (average)
P1 (average)
P2 (average)
Step
P3 (peak)
P1 (average)
P2 (average)
Step
P2 (average)
P1 (average)
P3 (average)
Step
P2 (average)
P1 (average)
P3 (bottom)
Enclose the desired
measurement area.
Region is automatically set.
→
Check/adjustment
Illustration of automatic setting
Center line that divides the top and
bottom of the step
P1
P3
(reference)
(step=P3-(P1+P2)
÷
2)
P2
(reference)
Summary of Contents for ZG -
