Omron ZG -, User Manual

Page: 48 / 210

Setting Measurement Conditions - FUN Mode
46
ZG User’s Manual
Selecting measurement items
1
Select [SENS].
2
Select [TASK2].
The default setting for [TASK1] is
[HEIGHT1]. To set a measurement
item other than [HEIGHT1] to [TASK1],
change the measurement item to the
desired item.
Setting Measurement
Items p.60
3
Select [2PTS-2] from the
measurement items.
Scroll pages by the
←
LEFT/
→
RIGHT key, and select the
measurement item.
To measure multiple items
Simultaneous measurement of up to eight items can be performed. To do this, repeat steps 2
and 3.
Note, however, that the maximum number of measurement points that can be set at once is
16 points. For this reason, eight tasks cannot be set in the case of measurement items that
use multiple points. For example, the maximum number of tasks that can be set when using
three points for a single task, such as in 3-pt step, is five tasks.
step
2
1 TE AC H 2 I MAG E
3S EN S 4 COR E C T
M E AS
TASK2:----
←→
P1/2
MEAS/SENS
Important
2PTS-2
←→
P2/5
MEAS/ITEM T2
N ot e