I/O Settings
98
ZG User’s Manual
Setting Serial Output Conditions
This section explains the settings required at serial output.
Serial Output at Trigger Measurement
Set whether or not to perform serial output at trigger measurement.
Communication Method p.127
FUN mode-[I/O]-[SERIAL]-[AUTO]
With auto output, output on the USB interface only is enabled.
Setting value
Description
OFF
Sets the command response method for serial output.
Measurement data is output only when a data acquisition command
is input from an external device.
(default value)
ON
Sets the auto output method for serial output. The measurement
data is output when measurement ends.
(MEASURE or other commands are not required.)
Important
Summary of Contents for ZG -
