Installation and Operation Instructions
Directional Sensor
Introduction:
The ECCO DS1500 is a solid-state reverse motion sensor which can be used
on vehicles with any type of speedometer, including electronic. It activates the
back-up alarm every time the vehicle moves backwards, in any gear, ignition
on or off. The DS1500 meets the California alarm device requirements for
refuse trucks.
IMPORTANT!
Read all instructions before installing and using. Installer: This manual must be
delivered to the end user.
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
LAB-107 Rev F
Page 1 of 4
