68
SECTI
ON 4
4-3 Speci
fications
and
Dimen
s
ion
s
Z500
Setup Manual
SECTION 4
Appendix
Note:
For measurement at an average number of times of 64 with an OMRON K3AS Linear Sen-
sor Controller connected.
Perfor-
mance
specifica-
tions
Results output
Terminal block
11 input points: TRIGGER, LD-OFF, RESET, D10 to D17
21 output points: DO0 to DO19, GATE
Monitor interface
1CH (for pin jack or overscan monitor)
Analog output resolution
The full scale for output can be divided into a maximum
of 40,000 gradations.
Resolution (See note): 0.25 mV (±5 V), 0.4
µ
A (4 to 20
mA)
General
specifica-
tions
Power supply voltage
21.6 to 26.4 VDC
Current consumption
1 A max. (with 2 Sensors connected)
Insulation resistance
20 M
Ω
min. between all DC external terminals and GR
terminal (100 VDC megger)
(with internal surge absorber removed)
Dielectric strength
1000 VAC, 50/60 Hz between all DC external terminals
and GR terminal
(with internal surge absorber removed)
Leakage current
10 mA max.
Noise resistance
1500 Vp-p; pulse width: 0.1
µ
s/1
µ
s, Rising edge: 1-ns
pulse
Vibration resistance
10 to 150 Hz (double amplitude: 0.1 mm) for 8 min.
each in X, Y, and Z directions
Shock resistance
200 m/s
2
, 3 times each in 6 directions
Ambient temperature
Operating: 0 to +50 °C, Storage: -15 to +60 °C
(with no icing or condensation)
Ambient humidity
Operating and storage: 35 to 85 %RH
(with no condensation)
Ambient environment
No corrosive gases
Ground
Ground the Z500's ground terminal to less than 100
Ω
.
Degree of protection
IEC IP20 (in-panel)
Material
Unit: ABS
Weight (including packag-
ing)
Approx. 1300 g (Unit: Approx. 700 g)
Accessories
2 manuals, 1 resistor (250
Ω
, 1/2 W)
Model
Z500-MC10E
Z500-MC15E
Item
Input/Output Type
NPN
PNP
•
Judgment output
RS-232C output
Terminal block output
•
Measurement value output (measurement value)
RS-232C output
Analog output