![background image](http://html.mh-extra.com/html/omron/z500-sw17/z500-sw17_setup-manual_743396025.webp)
Z500
Setup Manual
SECTION 1
1-2 Com
p
o
n
en
t Nam
es an
d F
unction
s
23
SECTION 1
Wiring and Connection
1-2-2 Controller
7. Connected to the ground wire.
8. Connected to the power supply.
9. Connected to external devices such as a PLC.
10. Connected to external devices such as a PLC.
11 Connected to the monitor.
12. Connected to a console.
13. Connected to the sensor.
14. Connected when using analog output.
15. Do not use. (Turn OFF the DIP switch.)
16. Connected to external devices such as a personal computer or PLC.
17. Lit while power is ON.
Two, M2
×
4
Lever screws:
M2
×
5
Monitor cap
(provided as an accessory)
Beam cover attached
Beam cover removed
Z500
MULTI-DIMENSION CONTROLLER
10. Input terminals
11. Monitor connector
Do not remove the
sticker on the side.
Do not open.
12. Console connector
13. Sensor connectors
15. DIP switch
8. Power Supply
terminals
7. Ground terminal
9. Output terminals
9. Output terminals
14. Analog output
terminals
RS-232C
connector
POWER
indicator
16.
17.
Z500-MC10E/MC15E
Shading indicates parts that are lifted to see the terminals underneath.