24
SECTION 1
1-3 Con
n
ecting
Periphe
ra
l Devices
Z500
Setup Manual
SECTION 1
Wiring and Connection
1-3 Connecting Peripheral Devices
This section shows how to connect peripheral devices to the Z500.
NOTICE
• Be sure to turn OFF the power supply before connecting or disconnecting cables. The
peripheral device may be damaged if connected or disconnected with the power supply
turned ON.
• The connector for each peripheral device is capped when the Z500 is shipped.
For a connector not in use, leave the cap in place to protect against dust, dirt, and static
electricity.
1-3-1 Connecting a Console
Connect the Z300-KP console to the Z500's CONSOLE connector.
1-3-2 Connecting a Monitor
Connect the F150-VM monitor cable to the Z500's MONITOR connector.
ESC
TRIG
SHIFT
ENT
CONSOLE
CONSOLE
POWER
SYNC
MONITOR