Z500
Setup Manual
SECTION 1
1-3 Con
n
ecting
Periphe
ra
l Devices
25
SECTION 1
Wiring and Connection
1-3-3 Connecting a Sensor
Be sure to attach the three ferrite cores (the sensor’s accessories) to the sensor
cable. Two ferrite cores should be attached to the cable within 100 mm of the
controller's SENSOR connector, and another two should be attached within 100
mm of the sensor.
When using an extension cable, attach two ferrite cores to the cable within 100
mm of the sensor, and another two within 100 mm of the controller's connector.
Ferrite core
(Attached to the sensor when the sensor is shipped)
Shift the position of the core, if necessary
Ferrite core (accessory)
100mm max.
100mm max.
Ferrite cores (accessories)
SENSOR
Ferrite core
(Attached to the sensor when the sensor is shipped)
Shift the position of the core, if necessary
Ferrite core (accessory)
100mm max.
100mm max.
Ferrite cores (accessories)
SENSOR