Omron trajexia CJ1W-MCH72, Operation Manual

Page: 99 / 374

All BASIC commands Section 4-2
88
4-2-13 $ (Hexadecimal input)
/i
4-2-14 ' (Comment field)
/i
4-2-15 : (Statement separator)
/i
Type System command
Syntax $hex_num
Description The $ command makes the number that follows a hexadecimal number.
Arguments • hex_num
A hexadecimal number (consisting of the characters 0 - 9 and A - F).
hex_num ranges from 0 to FFFFFF.
Example >>TABLE(0, $F, $ABCD)
>>print TABLE(0), TABLE(1)
15.0000 43981.0000
See also HEX (PRINT)
Type Program command
Syntax '
Description ' marks all that follows it on a line as comment and not program code.
Comment is not executed when the program is run. You can use ' at the
beginning of a line or after a valid statement.
Arguments N/A
Example ' This line is not printed
PRINT "Start"
See also N/A
Type Program command
Syntax :
Description The statement separator : separates multiple BASIC statements on one
line. You can use it on the command line and in programs.
Arguments N/A
Example PRINT "THIS LINE": GET low : PRINT "DOES THREE THINGS"
See also N/A