![background image](http://html1.mh-extra.com/html/omron/sysmac-c1000h/sysmac-c1000h_operation-manual_743079393.webp)
395
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. W140-E1-04
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
Date
Revised content
1
–––
Original production
2
August 1990
Complete rewrite and reorganization based on resource document 29–93G.
Information on SYSMAC LINK Systems added especially in reference to SR and
AR bits and SEND(90)/RECV(98).
3
September 1993
The sections have been rearranged for greater clarity and ease of understanding.
Sections 7–1
and
7–2
have been deleted and
Sections 7–3
and
7–4
have been
moved to
Sections 4–5
and
4–6
, respectively.
Mnemonic codes have been added throughout the manual.
Terms have been standardized.
The information in
Appendices B
and
C
has been given in greater detail and in-
cludes standardized terms.
Scan time has been replaced by cycle time throughout the manual.
Page 7:
Catalogue number for the SYSMAC LINK System Manual was cor-
rected.
Page 20:
Model number CT041 has been added to High-speed Counter Units
in the table. ID Sensor Unit has been added to the table.
Page 28:
“node” corrected to “data link table entry” in the table.
Page 163:
Step programming diagram clarified.
Page 165:
Step programming diagram clarified and a note has been added.
Page 167:
Step programming diagram clarified.
Pages 299 to 311:
Model numbers have been updated.
Pages 342 to 344 :
Flag bit numbers have been corrected.
3A
October 1994
Caution, Warning, and Danger symbols have been added throughout the manual.
Page 7:
LSS Operation Manual catalog number changed.
Pages 295 to 305:
Model numbers have been updated.
04
May 2003
Page 69:
Information on changing Units on-line added.
Page 70:
Paragraph at bottom of page removed.
Page 170:
Information on valid ranges added.
Page 209:
“TC” removed from priority list.
Page 288:
One row added to table.
Page 349:
Information on SR bit operation added.