257
00100 ON (i.e., timer starts operation, turning OFF 00500, which is turned
back ON when the timer has finished counting down the SV).
(This example is in MONITOR mode.)
Monitoring
00100 and 00500.
Indicates that force set/reset is in progress.
Indicates that the time is up.
Monitoring
TIM 000.
Setting TIM 000
turns ON 00500.
Returns to the beginning
when the key is released.
Display with 0010 originally
ON.
Timer starts timing, turning
00500 OFF.*
When the time is up, 00500
goes ON again.
*Timing not done in PROGRAM mode.
0010000500
OFF^ OFF
T0000010000500
^ OFF^ OFF
T0000010000500
0123^ OFF^ OFF
T0000010000500
0000^ OFF^ ON
T0000010000500
0123^ OFF^ OFF
T0000010000500
0000^ ON^ ON
T0000010000500
0123^ ON^ OFF
T0000010000500
0122^ ON^ OFF
T0000010000500
0000^ ON^ ON
0010000500
^ OFF^ OFF
0010000500
ON^ OFF
7-2-3
Hexadecimal/BCD Data Modification
When the Bit/Word Monitor operation is being performed and a BCD or hexa-
decimal value is leftmost on the display, CHG can be input to change the
value. SR words cannot be changed.
If a timer or counter is leftmost on the display, the PV will be displayed and
will be the value changed. See
7-6-7
Changing Timer/Counter SV
for the pro-
cedure to change SV. PV can be changed in MONITOR mode only when the
timer or counter is operating.
To change contents of the leftmost word address, press CHG, input the de-
sired value, and press WRITE
Monitoring Operation and Modifying Data
Section 7-2
