Omron SYSMAC C1000H, Operation Manual

Page: 308 / 396

303
Appendix B
Programming Instructions
A PC instruction is input either by inputting the corresponding Programming Console key(s) (e.g., LD, AND,
OR, NOT) or by using function codes. To input an instruction via its function code, press FUN, the function
code, and then WRITE. If the function code is in pointed parentheses <like this>, then SHIFT must be pressed
before the above sequence. Codes requiring SHIFT are for block programming instructions.
Function Code Name Mnemonic Page
-- AND AND 46, 108
-- AND LOAD AND LD 49, 109
-- AND NOT AND NOT 46, 108
-- COUNTER CNT 122
-- LOAD LD 45, 108
-- LOAD NOT LD NOT 45, 108
-- OR OR 46, 108
-- OR NOT OR NOT 46, 108
-- OR LOAD OR LD 50, 109
-- OUTPUT OUT 48, 109
-- OUTPUT NOT OUT NOT 48, 109
-- TIMER TIM 118
00 NO OPERATION NOP 116
01 END END 48, 107, 116
02 INTERLOCK IL 88, 113
03 INTERLOCK CLEAR ILC 88, 113
04 JUMP JMP 90, 115
05 JUMP END JME 90, 115
06 FAILURE ALARM FAL 208
07 SEVERE FAILURE ALARM FALS 208
08 STEP DEFINE STEP 199
09 STEP START SNXT 199
10 SHIFT REGISTER SFT 127
11 KEEP KEEP 112
12 REVERSIBLE COUNTER CNTR 125
13 DIFFERENTIATE UP DIFU 92, 110
14 DIFFERENTIATE DOWN DIFD 92, 110
15 HIGH-SPEED TIMER TIMH 121
16 WORD SHIFT WSFT 134
20 COMPARE CMP 142
21 MOVE MOV 135
22 MOVE NOT MVN 136
23 BCD-TO-BINARY BIN 148
24 BINARY-TO-BCD BCD 149
25 ARITHMETIC SHIFT LEFT ASL 131
26 ARITHMETIC SHIFT RIGHT ASR 132
27 ROTATE LEFT ROL 132