![background image](http://html.mh-extra.com/html/omron/nt20s/nt20s_operation-manual_744540097.webp)
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
DIP-SW Status
Init. Memory
Memory Switch
Comm. Type
Key Sound
Buzzer Sound
Host Link
OFF
Bk light Off
Tool Mode
OFF
None
NT20M
(1/2)
Quit
WRT&
EXIT
MEMORY SW MENU
Page
78
Setting the Conditions of Communications with the PC/Host by Using the Memory Switches
Section 3-5
3-5-1
Selecting the Host Communication Method (NT20S-ST121-EV3
only)
The NT20S-ST121-EV3 can be connected to a PC by the host link or the NT link.
Either link can be selected by setting the “Comm. Type” memory switch. The facto-
ry setting has been made to the “Host link”.
Select the host communication method by the menu operation from the System
Menu as mentioned below.
Select “Maintenance Mode”.
Select “Memory Switch”.
Repeatedly pressing the
“Comm. Type” touch switch
causes the setting to cycle
through the options “Host link”,
“NT link”, and “NT Link 1:N”, in
that order.
To set and quit the menu, press the [WRT&EXIT] touch switch. To quit without set-
ting, press [Quit].
Reference: The communication method must be selected according to the method that the
connecting PC supports.
Summary of Contents for NT20S
