Omron NT20S, Operation Manual

Page: 239 / 308

220
Terminal Commands Section 6-6
Set Cursor Position
Format
1B
[ESC]
2B
+ x
1
* *
x
2
* *
x
3
* *
y
1
* *
y
2
* *
y
3
* *
x
1
x
2
x
3
: X coordinate (3-digit BCD)
000 to 255
y
1
y
2
y
3
: Y coordinate (3-digit BCD)
000 to 127
Description Before displaying a character string with the Terminal commands, use this com-
mand to set the bottom-left point of the first character to be displayed.
Reference: The cursor position set with this command is also the bottom-left point of the first
character displayed if the displayed characters are enlarged.
Specify Displayed Characters
Format
1B
[ESC]
34
4
n
1
* *
n
2
* *
c
1
* *
c
2
* *
c
n
* *
c
3
* *
n
1
n
2
: Character string length as a number of normal characters (2-digit hexade-
cimal)
01 to 20H (1 to 32)
c
1
c
2
c
3
to c
n
: Character-string to display
Description
S
The character string is displayed from the cursor position.
S
The character-string data can contain a mixture of normal (alphanumeric) char-
acters and marks. Refer to Appendix M Special Characters for details.
S
The character string is displayed according to the enlargement and display at-
tributes set with commands.
Reference: The character string continues on the next line if it cannot fit into a single line.
Set the position where the character string is displayed with the Set Cursor Posi-
tion Command (refer to 6-6 Set Cursor Position).