![background image](http://html.mh-extra.com/html/omron/nt20s/nt20s_operation-manual_744540149.webp)
130
Bar Graphs
Section 4-5
S
Orientation and incremental direction
The orientation and incremental direction of the bar graph can be selected from
those mentioned below.
↑
(up):
The bar graph increments upward in the vertical orientation.
↓
(down):The bar graph increments downward in the vertical orientation.
←
(left): The bar graph increments to the left in the horizontal orientation.
→
(right):The bar graph increments to the right in the horizontal orientation.
Direction:
→
Direction:
↑
S
Graph frame
Select whether or not the graph frame (boundary line of a graph display area)
which indicates the effective display range is displayed.
←
This frame is not displayed if
“Graph frame: No” has been set.
S
Setting the 100 % value and % display
Set a value which corresponds to 100 % for the “100 % value”. The available
value range is “0 to 99999999” (max. eight digits). For the “% display”, whether
or not the proportion (percentage) of the reference numeral memory table value
to the “100 % value” is displayed in a numeral can be selected. The display value
is calculated as follows:
“% display” value = Numeral memory table value
B
“100 % value” x 100
For the font and attributes used for the numeral display, refer to “Numerals which
can be displayed” (page 127).
S
Sign display and display method
Select whether or not the bar graph which indicates a value below 0 % is dis-
played.
Summary of Contents for NT20S
