![background image](http://html.mh-extra.com/html/omron/nt20s/nt20s_operation-manual_744540286.webp)
267
Method for Making the Cable for Connection to the Host
Appendix G
Soldering
(1) Slide heat-shrink tube over each wire.
(2) Pre-solder each wire and connector cable.
(3) Solder each wire to the connector terminal.
Heat-shrink tube
(Hishitube F, 1.5 dia, l = 10)
Soldering iron
(4) Push the heat-shrink tube over the soldered joint and heat the tube to shrink it in place.
Heat-shrink tube
Connector Cover Assembly
Assemble the connector covers as shown in the diagram below.
End connected to FG
Aluminum foil tape
End not connected to FG
Summary of Contents for NT20S
