b&c data system EzW User Manual Download | Manualshive

Page: 1 / 42

background image

FCC WARNING STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of FCC Rules.   These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.   This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in   accordance   with   the   instruction   manual,   may   cause   harmful   interference   to   radio
communications.    Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the interference at his expense.

FCC COMPLIANCE STATEMENT

This reader complies with Part 15 of the FCC Rules. Operation of this reader is subject to the
following conditions: this reader may not cause harmful interference and this reader must accept
any interference received, including interference that may cause undesired operation.

CE STANDARDS

An independent laboratory performed testing for compliance to CE requirements. The unit under
test was found compliant to Class A.

B & C Data Systems * (541) 601-8282 * http://bcdata.com

1 of 42

1
2
3
...
»

Summary of Contents for EzW











































Reviews:

No comments

Related manuals for EzW

Brand: EC Line Pages: 23

Brand: Gantner Pages: 78

Brand: Telpo Pages: 25

Brand: CCV Pages: 25

Saturn All-in-one

Brand: Touch Dynamic Pages: 25

Brand: Touch Dynamic Pages: 30

Terminal Block NI TB-2706

Brand: National Instruments Pages: 8

Pro-face GLC2300

Brand: Digital Electronics Corporation Pages: 155

Brand: Wincor Nixdorf Pages: 97

Brand: Custom Audio Electronics Pages: 28

DD2060 X Series

Brand: Bilanciai Pages: 4

LCD Customer Display PD-7100

Brand: POSIFLEX Pages: 16

Brand: Tailwind Pages: 2

DOS Portable Data Terminals

Brand: Falcon Pages: 184

Brand: CAN Pages: 6

Brand: CAN Pages: 7

EverServ ES7700

Brand: ParTech Pages: 32

Brand: Union Community Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands