![background image](http://html.mh-extra.com/html/omron/nt20s/nt20s_operation-manual_744540102.webp)
Buzzer Sound
Bk light Off
Automatic Reset
ON
10min
Yes
Key Press Sound
ON
Quit
WRT&
EXIT
Page
Stop Bits
Parity Check
Flow Control
1bit
Even
Baud Rate
LMP Bit Control
RS/CS
19200bps
Enable
Data Bits
8bits
Quit
WRT&
EXIT
Page
83
Setting the Conditions of Communications with the PC/Host by Using the Memory Switches
Section 3-5
Select “Page down”.
'
The selected option displayed when the corresponding touch switch is
pressed: the options for each switch are indicated below:
S
Data Bits
7bits / 8bits
S
Stop Bits
1bit / 2bits
S
Parity Check
None / Even / Odd
S
Flow Control
None / RS/CS / XON/XOFF
S
Baud Rate
2400bps / 4800bps / 9600bps / 19200bps
S
LMP Bit Control
Enable / Disable
Note:
Use the same condition settings as set for the host. It is recommended that the
highest baud rate possible is selected for both the host and the NT20S.
'
For details on lamp bit control, refer to Section 3-8 “Various System Settings”
on page 91.
Summary of Contents for NT20S
