![background image](http://html1.mh-extra.com/html/omron/ns-cxdc1-v3/ns-cxdc1-v3_user-manual_744231085.webp)
63
Setting Symbol Names and I/O Comments for Use as Labels
Section 4-15
Transfers between the PT
and a Memory Card
When a project for which data transfer security has been set is stored in the
PT, a password must be input at the PT to upload the project data from the PT
to a Memory Card. Data cannot be uploaded from the PT unless the correct
password is input, preventing theft of data to a Memory Card. A password is
also required to download data from a Memory Card. This prevents data from
being accidentally overwritten.
Procedure
1,2,3...
1.
Select
File - Data Transfer Security - New Data Transfer Security
Set-
ting.
2.
Set the security password.
3.
Transfer to the PT the project for which data transfer security has been set.
4-15 Setting Symbol Names and I/O Comments for Use as
Labels
Symbol names or I/O comments of communications addresses can be auto-
matically used as label text strings for the following functional objects.
• ON/OFF Buttons (when Write Address is set)
• Word Buttons (when Write Address is set)
• Bit Buttons (when Display Address is set)
• Word Lamps (when Display Address is set)
In the same way, when setting communications addresses in the Alarm/Event
Details Dialog Box, symbol names or I/O comments can be set as the alarm
messages.
Download
Upload
NS-series PT
A password from the computer is required to
transfer data (either uploading or downloading).
The data cannot be transferred unless the correct
password is input.
When data transfer security is set
NS-series PT
Memory Card
Upload
Download
Password input from the PT
When data transfer security is set
Summary of Contents for NS-CXDC1-V3
