Omron DeviceNet Safety NE1A-HDY01, Operation Manual

Page: 77 / 95

54
Downloading Parameters Section 3-5
3-5 Downloading Parameters
Parameter information saved in the Memory Card can be downloaded to the
device that is connected online.
3-5-1 Creating Device Parameter Files
The device parameter files downloaded from the Mobile Console to a device
(*.dvf) are created on the Network Configurator.
1,2,3... 1. Start the Network Configurator and open the network configuration file.
(*.ncf).
2. Confirm that the configuration for the device to which the parameter will be
downloaded has been verified or locked (an S mark or locked mark will be
displayed).
IMPORTANT The device parameter file (*dvf) used by the Mobile Console is created from a
network configuration file (*.ncf) that has been verified or locked. The system
may not operate properly if the file is not verified or locked.
3. Select the device and then select Device - Parameters - Save from the
menu bar.
4. A device parameter file will be created in the specified folder.
3-5-2 Downloading the File
Use the following procedure to download the device parameter file (*.dvf) from
the Mobile Console to a device.
1,2,3... 1. Save the device parameter file on a Memory Card and set the Memory
Card in the Mobile Console.
2. Tap the Download Icon in the Main Window (2/4).