Omron DeviceNet Safety NE1A-HDY01 Operation Manual Download Page 61

Page: 61 / 95

Basic Online Operations

Section 3-1

3-1

Basic Online Operations

This section describes the procedure for online operations. Make sure that
you read through the material before performing online operations.

3-1-1

Connecting the Mobile Console

The Mobile Console can be used by connecting it to the USB port on an
NE0A/NE1A-series Controller.

When the Mobile Console is connected to the USB port of an NE0A/NE1A-
series Controller, the following Main Window will be displayed. The device sta-
tus will be displayed in the Main Window.

Note

If the USB cable is removed and reconnected to a different NE0A/NE1A-
series Controller after the Mobile Console has been connected online, tap the

Connect

Icon.

Device Status

The device status is indicated by the following colors.

3-1-2

Specifying Network Numbers

DeviceNet Safety supports building more than one network. Even if the user
system contains only one network, a network number must be set.

For the Mobile Console to communicate with a device in the following cases,
the network number must be specified.

• To connect to a device that is still in the default status, e.g., when replac-

ing a device

• When resetting a device to the default status from the Mobile Console

Connect

Icon

Tap the

Connect

Icon when the Mobile Console is

reconnected to the USB port of a different NE0A/NE1A-
series Controller.

Device Status

Color

Status

Blue

RUN

Green

IDLE

Yellow

Warning

Red

Alarm

Gray with white border

Disconnected

Gray with green border

Default status (not configured)

Summary of Contents for DeviceNet Safety NE1A-HDY01
































































































Search results

Summary of Contents for DeviceNet Safety NE1A-HDY01

Reviews:

Related manuals for DeviceNet Safety NE1A-HDY01

Brands by name

Popular brands

Omron DeviceNet Safety NE1A-HDY01, Operation Manual

Search results

Summary of Contents for DeviceNet Safety NE1A-HDY01

Reviews:

Related manuals for DeviceNet Safety NE1A-HDY01

Brands by name

Popular brands