![background image](http://html1.mh-extra.com/html/omron/devicenet-safety-ne1a-hdy01/devicenet-safety-ne1a-hdy01_operation-manual_743555035.webp)
12
External Connectors
Section 1-5
1-5
External Connectors
The Mobile Console is equipped with a USB port for connection to external
devices. (It also has a LAN port that is for future expansion.)
1-5-1
External Connectors
To connect a USB cable, remove the protective cap covering the connector
and connect the cable.
USB Communications Connector
Connect the USB communications connector to the USB port of a NE1A-
series Controller. USB version 1.1 is supported. Use a commercially available
USB cable.
IMPORTANT
Make sure that the USB cable is less than 3 m.
LAN Connector
The LAN connector cannot be used. It will be used for future expansion.
LAN port (for future expansion)
Protective caps
USB port
Summary of Contents for DeviceNet Safety NE1A-HDY01
