52
Uploading Parameters
Section 3-4
3-4
Uploading Parameters
Parameter information of the connected device can be saved to a Memory
Card.
1,2,3...
1.
Set the Memory Card in the Mobile Console.
2.
Tap the
Upload
Icon in the Main Window (1/4).
The following dialog box will be displayed.
3.
Tap the
Yes
Button.
• Tapping the
No
Button will cancel uploading.
When uploading the device parameters has been completed, the Save De-
vice Parameter Dialog Box will be displayed. The file name will be automat-
ically input as shown in the following figure.
4.
Check the location and file name for saving the file, and then tap the
OK
Button.
• Use the input panel or keys on the Mobile Console to change the file
name if necessary.
• The following dialog box will be displayed if no Memory Card is inserted.
Insert the Memory Card and tap the
OK
Button.
Storage Card means the
Memory Card
Summary of Contents for DeviceNet Safety NE1A-HDY01
