Omron DeviceNet Safety NE1A-HDY01, Operation Manual

Page: 21 / 95

xxii
Checking the Contents of the Package 7
7 Checking the Contents of the Package
■
NE1A-HDY01 Mobile Console
The following items should be included in the package. Check to make sure
that all of the items are included, and that there is no leakage or damage.
• Defective Display Pixels
The liquid-crystal panel has been made using very advanced technology,
but there may be defective display pixels that produce gaps or bright points
(points that remain lit) on the display. This is an inherent aspect of liquid
crystals and does not indicate any product failure. We do our utmost to
minimize defective display pixels, but with current manufacturing technolo-
gy, it is impossible to eliminate them completely.
■
Charger and Battery Set NE1A-BTCHG-JP (for Japan)/NE1A-BTCHG-EU
(for Europe)
■ RB-B2001A Replacement Battery Pack
8 Definition of Terms
The following terms are used in describing the NE1A-HDY01.
Name Description Quantity
Mobile Console NE1A-HDY01 1
Hand strap 1
Instruction Sheet 1
SYSMAC ID registration card (Japanese) 1
SYSMAC ID registration card (English) 1
Address sheet 1
Name Description Quantity
Charger RB-C2001 1
Battery Pack RB-B2001A 1
Power Cable Power cable for the specified destination 1
Instruction Sheet 1
Name Description Quantity
Battery Pack RB-B2001A 1
Instruction Sheet 1
Term Definition
Mobile Console A portable terminal that is used to perform maintenance for
Safety Network Controllers and Safety I/O Terminals. “Mobile
Console” is the name of OMRON’s NE1A-HDY01.
Battery Pack The RB-B2001A Lithium-ion Battery Pack.
Network Configurator A software application that is used to build, set, and manage
DeviceNet, DeviceNet Safety, and EtherNet/IP networks.
“Network Configurator” is the name of OMRON’s WS02-
CFSC-J/E.
Safety Refers to devices, functions, or data for which special safety
measures for use in safety controls have been implemented.
Standard Refers to devices, functions, or data for Standard applica-
tions. “Standard” is used to distinguish Standard Devices,
functions, or data from those for which special safety mea-
sures for use in safety controls have been implemented.