Omron DeviceNet Safety NE1A-HDY01 Operation Manual Download Page 80

Page: 80 / 95

Downloading Parameters

Section 3-5

10. To lock the configuration, tap the

Yes

Button. If the device was in RUN

mode before downloading, the following dialog box will be displayed asking
whether the device should be returned to RUN mode.

11. Tap the

Yes

Button or the

Button.

• Tap the

Yes

Button to return to RUN mode.

• Tap the

Button to leave the device in IDLE mode.

12. Tap the

Button.

The display will return to the Main Window.

IMPORTANT

A device password cannot be set with the Mobile Console. Set the device
password from the Network Configurator.

WARNING

Serious personal injury may possibly occur due to loss of safety functions.
Observe the following precautions.

Perform a user test before operating the system, and check to make sure that
all the device configuration data and operations are correct.

After replacing a device, check to make sure that the replacement device is in
the appropriate configuration and is operating correctly

Summary of Contents for DeviceNet Safety NE1A-HDY01
































































































Search results

Summary of Contents for DeviceNet Safety NE1A-HDY01

Reviews:

Related manuals for DeviceNet Safety NE1A-HDY01

Brands by name

Popular brands

Omron DeviceNet Safety NE1A-HDY01, Operation Manual

Search results

Summary of Contents for DeviceNet Safety NE1A-HDY01

Reviews:

Related manuals for DeviceNet Safety NE1A-HDY01

Brands by name

Popular brands