40
Basic Online Operations
Section 3-1
(2) If the network number was set manually and you know the number, you
can also set it manually.
Confirming the Network Number from the Network Configurator
The network number set in the user’s system can be confirmed with the fol-
lowing procedure.
1,2,3...
1.
From the Network Configurator, open the network configuration file (*.ncf)
that was downloaded to the system.
2.
Select
Network - Properties
from the menu bar.
The following dialog box will be displayed.
3.
Check the network number that is displayed.
3-1-3
Changing the Connected Device
This section describes how to change the connected device. You can connect
online to any device connected to the same DeviceNet network as the NE0A/
NE1A Controller to which the USB cable is connected. The Mobile Console
can be connected to devices that are on the same DeviceNet network as the
NE0A/NE1A-series Controller connected with the USB cable.
1,2,3...
1.
Tap the
Change Target
Icon in the Main Window (1/4 or 2/4).
The following dialog box will be displayed. Devices on the same DeviceNet
network as the NE0A/NE1A-series Controller connected with the USB ca-
ble will be displayed.
Summary of Contents for DeviceNet Safety NE1A-HDY01
