![background image](http://html1.mh-extra.com/html/omron/cxone-ald-v4-10-2010/cxone-ald-v4-10-2010_operation-manual_743059092.webp)
76
Ratio Setting (Block Model 033)
Section 6-9
Numeral Display and Input objects are used to create these fields, and a ten-
key pad is displayed when a field is touched.
The following table shows the upper and lower limits of the setting ranges.
The following table shows the units that are displayed. These units are fixed.
The following values are used in communications with the PLC.
Data is written to the write address of each tag ITEM using a Before Writing
Numeral/String macro, as follows:
$W2047=GETNUMVAL();
WRITECMEM([K1/A1/B1/MH_LMT/ML_LMT/MV_IDX],$W2047,1);
The following screen is a Tuning Screen for a Ratio Setting face plate built
using the Face Plate Auto-Builder for NS in a 640
×
480 screen resolution.
ML (Low MV limit)
ML_LMT(ITEM077)
MV index position
MV_IDX(098)
Parameter
Lower limit
Upper limit
Ratio range
−
10.000
10.000
Input bias
−
320.00
320.00
Output bias
−
320.00
320.00
MH (High MV limit)
−
320.00
320.00
ML (Low MV limit)
−
320.00
320.00
MV index position
−
15.00
115.00
Parameter
Unit
Ratio range
None
Input bias
%
Output bias
%
MH (High MV limit)
%
ML (Low MV limit)
%
MV index position
%
Parameter
Values used in PLC device/communications
Ratio range
−
10,000 to 10,000 (Displayed value
×
1,000)
Input bias
Percent data
Output bias
Percent data
MH (High MV limit)
Percent data
ML (Low MV limit)
Percent data
MV index position
Percent data
Parameter
Tag ITEM
Summary of Contents for CXONE-ALD-V4 - 10-2010
