![background image](http://html1.mh-extra.com/html/omron/cxone-ald-v4-10-2010/cxone-ald-v4-10-2010_operation-manual_743059060.webp)
44
Basic PID (Block Model 011)
Section 6-1
$W2047=GETNUMVAL () ;
WRITECMEM ([LL_SP/L_SP/H_SP/HH_SP],$W2047,1) ;
3: Parameter Settings
These fields are used to display and set each parameter. The following table
shows the tag ITEMs used to set these parameters.
Numeral Display and Input objects are used to create these fields, and a ten-
key pad is displayed when a field is touched. The following table shows the
upper and lower limits of the setting ranges.
The following table shows the units that are displayed. These units are fixed.
The following values are used in communications between the PLC and NS-
series PT.
Data is written to the write address of each tag ITEM using a Before Writing
Numeral/String macro, as follows:
$W2047=GETNUMVAL () ;
WRITECMEM ([P/I/D/MH_LMT/ML_LMT/MV_IDX],$W2047,1) ;
Parameter
Tag ITEM
P (Proportional band)
P (ITEM 054)
I (Integral time)
I (ITEM 055)
D (Differential time)
D (ITEM 056)
MH (High MV limit)
MH_LMT (ITEM 076)
ML (Low MV limit)
ML_LMT (ITEM 077)
MV index position
MV_IDX (ITEM 098)
Parameter
Upper limit
Lower limit
P (Proportional band)
0.1
999.9
I (Integral time)
0
9999
D (Differential time)
0
9999
MH (High MV limit)
−
320.00
320.00
ML (Low MV limit)
−
320.00
320.00
MV index position
−
15.00
115.00
Parameter
Unit
P (Proportional band)
%
I (Integral time)
S
D (Differential time)
S
MH (High MV limit)
%
ML (Low MV limit)
%
MV index position
%
Parameter
Values used in PLC device/communications
P (Proportional band)
1 to 9999 (10 x display value)
I (Integral time)
0 to 9999 (same as display value)
D (Differential time)
0 to 9999 (same as display value)
MH (High MV limit)
Percent data
ML (Low MV limit)
Percent data
MV index position
Percent data
Summary of Contents for CXONE-ALD-V4 - 10-2010
