Omron CXONE-ALD-V4 - 10-2010, Operation Manual

Page: 21 / 144

5
Upgrades Made for Version 3.0 Section 1-5
1-5 Upgrades Made for Version 3.0
The functional changes made between version 2.0 and version 3.0 of the
Face Plate Auto-Builder for NS are described in this section.
Additional Support for
Function Blocks Face plates can be built for the following function blocks in addition to the
function blocks supported for version 2.0.
• Indication and Setting (Block Model 031)
• Ratio Setting (Block Model 033)
• High/Low Alarm (Block Model 111)
• Timer (Block Model 205)
• Counter (Block Model 208)
• ON/OFF Valve Manipulator (Block Model 221)
• Motor Manipulator (Block Model 222)
• Reversible Motor Manipulator (Block Model 223)
• Motor Opening Manipulator (Block Model 224)
• Blended PID (Block Model 013)
• Batch Flowrate Capture (Block Model 014)
Automatic Comments for
Unit and Scaling Settings Comments are automatically entered for automatically allocated unit and scal-
ing settings when a project is generated. This prevents mistakes in editing
automatically allocated unit and scaling settings when editing projects.
1-6 Upgrades Made for Version 3.1
The functional changes made between version 3.0 and version 3.1 of the
Face Plate Auto-Builder for NS are described in this section.
Additional Support for
Function Block Face plates can be built for the following function block in addition to the func-
tion blocks supported for version 3.0.
• Segment Program 3 (Block Model 158)
Output in NS System
Version 6.6 and NS-
Runtime Version 1.0
Formats Projects can be output in NS System version 6.6 and NS-Runtime version 1.0.