![background image](http://html1.mh-extra.com/html/omron/cs1w-etn01/cs1w-etn01_operation-manuals_742528059.webp)
4-2
Section
CPU Bus Unit System Setup
46
IP Router Table
The IP router table sets how the Ethernet Unit communicates via the IP router
with nodes on other IP network segments. This table cannot be edited when the
FINS node number
IP address
automatic generation method is used for address conversion.
Node A
Node B
IP router
(Network number)
(Network number)
130.25.36.253
130.26.2.254
The IP router table is configured by the CX-Programmer as shown below. For
the IP network number, set the network number of the other IP network segment
that is to be communicated with. The length of the network number varies de-
pending on the IP address class. Four bytes are provided in the field for setting
the IP network number, so set the network from the beginning and then set 00 in
the remainder.
Settings
The following settings are for node A when network No. 130.26.X.X is connected
by the IP router with IP address 130.25.36.253. (Refer to the preceding dia-
gram.)
IP network number
IP address of IP router
130.26.0.0
130.25.36.253
A maximum of eight records can be registered. The default is for nothing to be
set.
For an explanation of how to make the settings, refer to the CX-Programmer
User’s Manual.
4-2-2 Mail Settings
Item
CX-Programmer default
Mail settings
None set.
User-created mail data address
Not set.
Local mail address
Not set.
Destination mail address
Not set.
SMTP server address
0.0.0.0 (Not set.)
Mail Settings
User Data in User Mail
Specify whether or not user data is to be added to mail contents when mail is
sent by turning ON the Mail Send Switch in the CPU Unit’s I/O Memory. (Refer to
page 51.) The user data is ASCII data stored with the CPU Unit’s I/O memory
address set for the mail function’s user-created mail data address. When user
data is sent, 1,024 bytes or the data up to the null code (00 Hex) will be sent.
Setting
Meaning
Not selected (Default)
User data not included in user mail.
Selected
User data included in user mail.
Setting range: 0.0.0.0 to 255.255.255.0
Setting range: 0.0.0.0 to 255.255.255.255